How to install power supply fan up or down?

A power supply fan is a component in your computer that keeps the power supply cool. The purpose of this component is to prevent damage to the other components inside your PC, including the graphics card and motherboard. An overheating PSU can lead to lots of issues with your system, including reduced performance and even complete failure.

What is a power supply fan?

A power supply fan is a cooling fan that is attached to the power supply unit (PSU). The PSU is part of your computer’s motherboard, and it converts AC current into DC current so that it can be used by the other components in your computer.

When you turn on your computer, the PSU starts working immediately. In order for this process to work correctly, it needs to be cooled down so that it doesn’t overheat or burn out. A cooling system consists of several different components:

  • An air flow regulator, which allows air from inside or outside your machine through an opening
  • A heat sink attached to a component like a CPU where heat can be absorbed by fins

how to install power supply fan up or down

Why would the fan be blowing up or down?

There are two basic reasons why the power supply fan is blowing up or down:

  • The PSU is upside-down. This can be caused by installing your PSU with the cables facing up, but it also happens if you flip your case upside-down when you’re working on it. If this is the problem, then just turn your case around (and maybe reorient your motherboard) and proceed with installation as usual.
  • The PSU is right side up and there’s not enough room for its exhaust vents to fit through without being blocked by other components in the computer case. This can happen if you have many hard drives or other large components mounted near each other in a tight space like an ATX tower case, so make sure you leave plenty of breathing room between them before proceeding with installation

How do I know whether my fan is blowing up or down?

When you’re looking at the power supply fan, you should be able to tell whether it’s blowing up or down by looking for the air flow. If the air is flowing out of an opening on the front of your computer, it’s blowing down and needs to be installed with its arrows pointing down. However, if your fan has no visible openings and simply looks like a metal box, then you’ll have to consult your motherboard manual or look underneath it for some kind of label that indicates which way is up.

If these options are unavailable as well, use a multimeter (if you have one) to check for voltage when testing for polarity; positive electricity will be flowing through a wire inserted into one hole on the motherboard while negative voltage flows through another hole nearby in order for everything to work properly!

Should I install my PSU fan facing up or down?

You might be wondering if it’s okay to install the PSU fan facing down or up. The answer is: it depends.

The general consensus from most experienced PC builders is that you should have your PSU fan facing down so that the heat from the unit can be dissipated into your case, rather than out of it through a vent or back panel. This will keep things running cool, which means less wear and tear on your components in the long run.

However, there are some pros who argue that installing a power supply with its exhaust pointing upwards is better because it provides better airflow over all components in a system (including graphics cards). They say this helps prevent dust buildup inside of your computer case and keeps everything cooler overall because of improved air circulation throughout all areas—especially important if you plan on overclocking any part of your rig!

Should I buy a fan that blows up or down?

You should buy a fan that blows up or down.

The reason for this is quite simple: air will always flow from higher pressure to lower pressure, and it makes no difference whether that’s above or below the fan. If your computer case has one of these fans installed on the side panel, then you’re blowing air into it—and if there’s not enough room inside your computer case for proper cooling, adding more warm air isn’t going to help at all!

Therefore, if you want more airflow through the case without increasing its internal temperature (and thus raising its ambient), then you’ll need to install an intake fan. However, keep in mind that putting too many intake fans can actually hurt performance because they’ll pull hot exhaust from components like CPUs and GPUs out of their sockets instead of letting them cool off naturally by just sitting there doing nothing…

Steps to install power supply fan up or down

  • Remove the power supply from your computer case
  • Remove the screws from the back of your power supply
  • Remove the fan from your power supply by unscrewing it from its housing
  • Install the fan in either direction, but remember to only install it in one direction (you don’t want to damage any components)
  • Reinstall your power supply into your computer case


The power supply fan is an important part of your computer. If you don’t have one, then your computer could overheat and cause damage to the components inside. The best placement for this fan depends on what kind of case you have and how much space there is inside it. If there isn’t enough room towards the top or bottom of your case, then it’s best not to put anything there because it will restrict airflow and cause more problems than necessary.

You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.